KNK

Stainless steel screen manufacturer of welding and looks brighter

by:KNK     2020-10-15
Stainless steel screen is made up of a number of units joined by welding method, lap joint interface are welded by argon arc welding, making each unit between strong even in together, after grinding, polishing perhaps drawing, color plating technology, has become our common to see the products of stainless steel screen. A, stainless steel screen is made full welding is good, is still a good welding process? Full welding is also our usual said seamless welding, after welding and perhaps by grinding, wire drawing polishing process, welding cracks are invisible after products. And spot welding process, there would be fillet welding process, is in the corner of the Angle of Yang and Yin metasomatism of spot welding, look from the front screen in the past, can see the gap of the interface. Gap of intrusive, and are of great master master cutting, welding, experts of the Lao shifu spot welding to product gap is very small, crack, of course, the more subtle, the better. The screen of the spot welding welding structure of the same firm, as a result of solder joints is the original stainless steel materials from melting blend in together, become a new structure, so it is strong. Second, welding work much more: 1, stainless steel screen, most of them are made of pipes, plate, flat steel, made of steel tubes with flat screen, welding process will be a lot more, plank hollow out of stainless steel screen welding process will be a bit less. But on the cost, hollow out screen does not necessarily cheaper than screen pipe do. 2, welding method: is there a spot welding and welding method of welding; Spot welding, Is the fillet welding) Welding work is small, the entire welding ( Full welding) Homework is bigger, so the screen of the screen than the spot welding of all-welded construction cost will be higher than that of 200 - Artificial cost 400 yuan/square meters. Some people say that stainless steel checkered, stainless steel screen made of stainless steel products, such as with long black, how to make it recover light, may become more bright? Here small make up recommend our some stainless steel products and maintenance, brighten skills: ( 1) Stainless steel lattice screen surface dust and grime with rain-water, weak detergent and warm water wash ( 2) Stainless steel screen logo, sticker weak washing agent to wash with warm water, difficult binder composition using alcohol or organic solvent to wipe. ( 3) Stainless steel products appearance with grease, oil, lubricating oil pollution, with a soft cloth to wipe clean, use a neutral cleaning agent or ammonia solution or special cleaning agent for washing. ( 4) If there are any acid attached stainless steel products appearance, immediately flush with water, then use ammonia solution or neutral fizzy soda solution immersion, with neutral washing or warm water after a wash. ( 5) Stainless steel are rainbow lines, surface is caused too much use of cleaning agent or oil, neutral wash wash to wash with warm water. ( 6) Stainless steel surface contamination caused by rust, available 10% nitric acid or abrasive cleaning agent washing, also can use special wash drugs wash. Articles by: stainless steel metal products co. , LTD. , foshan city, screen provides, this view does not represent the home station point of an article: stainless steel screen coating note next article: stainless steel screen manufacturer to tell you what is the screen partition?
Custom message
Chat Online
Chat Online
Chat Online inputting...