Project based decorative metal fabricator

KNK

Mirror stainless steel screen three processing steps

by:KNK     2020-10-15
Mirror stainless steel screen processing is a very fastidious workers technical ability way of processing, stainless steel screen to reach the effect of mirror surface, need to experience grinding, polishing and polishing three steps, to the stainless steel surface processing, like a mirror as smooth, shiny; Including polishing is to weld parts produced by the welding scar, and other surface uneven, through equipment grinding level off is smooth; Polishing is the stainless steel screen surface after grinding machining for waxing polishing, different polishing methods can achieve different mirror effect; And polished made with clean cotton cloth wheel in the surface friction and polished. Below we know about the detailed mirror stainless steel polishing processing steps together. 1, grinding: check whether all solder joints are not fully polished, existence coarse grinding trace, severe destruction of protective film, and excessive grinding, and rounded corners is too large, severe ends of grinding, grinding uneven in some places shades, etc all kinds of polishing grinding phase in a light stage beyond repair problems, if there are problems need to be returned to grind or repair. 2, polishing: using the high speed motor drive with wool wheel, cooperate with the big green wax to simulate the polishing method in front of the mirror polishing, purpose of this procedure is to put after the previous process for mirror polishing, polishing the finished workpiece rather than further grinding. Note that step in the process operation should not be polishing wax to rub the workpiece surface cladding, be careful not to cover membrane injury. 3, polished: with a clean cotton cloth round after a mirror surface friction, will clean all previous process after the completion of the workpiece, polished. Could not tell the difference between the goal of this process is the workpiece surface welding marks, and will throw ground workpiece polishing wax, high brightness to mirror 8 k, and the workpiece in sections and never throw almost see no difference. Achieve full mirror effect. Mirror stainless steel screen polishing processing in addition to have experienced technical staff, must have the appropriate processing equipment. Such as wax, polishing equipment, large green wax, wool wheel, and so on. Keep these necessities, technicians can play, work out all kinds of polished mirror stainless steel screen. Articles by: stainless steel metal products co. , LTD. , foshan city, screen provides, this view does not represent the home station point of an article: stainless steel screen coating note next article: stainless steel screen let us from rusting furniture
Custom message
Chat Online
Chat Online
Chat Online inputting...